[pageLogInLogOut]

#Nonwovens

PET spunbond from China – EDANA welcomes imposition of provisional anti-dumping measures

On 13 May 2026, after eight months of investigation, the European Commission imposed provisional anti-dumping duties of 45.6-50.0% on imports of PET spunbond from China. EDANA welcomes this expression of the Commission’s clear determination to protect EU industries from the unfair trade practices of Chinese producers.

According to the Commission’s findings, Chinese producers of PET spunbond have engaged in dumping practices on the EU market that have caused material injury to the EU industry, including declines in production, sales, and profitability. The imposition of provisional AD measures is therefore essential to re-establish a level playing field, to preserve European jobs, and to foster growth and innovation in the EU.

“It is encouraging to see the EU institutions are determined to support EU industries during these globally difficult times. EU production creates a lot of added value to our economy, and it is essential for the stability and prosperity of our continent that EU industrial value chains are not exposed to unfair, state-supported market behaviours on their home markets”, said Jacques Prigneaux, Market Analysis & Economic Affairs Director at EDANA.

The provisional anti-dumping duties will apply until 13 November 2026, by when the Commission must make a final decision in the case on whether to impose definitive anti-dumping duties for a 5-year period. At that time, the Commission may also decide to impose the definitive AD measures retroactively up to 90 days prior to the date of application of the provisional measures.

Jacques Prigneaux added: “EDANA and the EU industry will continue to cooperate fully with the Commission during the remainder of the proceedings. We look forward to final measures which maintain a level playing field on the EU market. We also want to remind all parties of the legal requirement to declare imports under the correct customs code. Accurate use of TARIC codes is fundamental to ensuring the properapplication of trade measures and avoiding material risks in customs compliance and import processing.”

The products concerned are defined as certain non-woven needle-punched sheets of polyester filaments, whether or not reinforced by glass fibers, weighing more than 70 g/m², of a thickness exceeding 0.5 mm but not exceeding 1.8 mm, impregnated with one or more binders, containing less than 30 % of glass fibers by weight, not coated or covered, and are to be classified under CN codes ex 5603 13 90, 5603 14 20 and ex 5603 14 80 (TARIC codes 5603 13 90 70 and 5603 14 80 70).



More News from EDANA

#INDEX 2026

INDEX™26 Awards winners announced: Setting new benchmarks in nonwovens

The nonwovens industry has officially crowned its new winners. Today at the opening of INDEX™ 2026, five companies were honoured with the INDEX™ Awards, the industry’s highest accolade for technical excellence and forward-thinking design.

#INDEX 2026

INDEX™26: World’s leading nonwovens exhibition presents groundbreaking product launches, exclusive seminars and immersive experiences

From 19 to 22 May 2026, 620 exhibitors from 44 countries will gather in Geneva at Palexpo for INDEX™26. The exhibition aims to demonstrate how the future of technical materials will increasingly be shaped by collaborative supply chains and integrated innovation across the nonwovens industry. This year’s edition focuses not only on individual technological advances, but also on how cooperation throughout the value chain can enhance the performance, sustainability and value of nonwoven solutions.

#Nonwovens

2025 Nonwoven production in Greater Europe: European Nonwovens Industry remains strong amid challenging market conditions

EDANA, the international association serving the nonwovens and related industries, released today the European annual statistics for 2025, offering a comprehensive picture of the nonwovens industry in Greater Europe. This information shows an overview of the industry’s strength and resilience across the region. According to the figures collected and compiled by EDANA, overall nonwovens production in Europe declined by around 2.2% in 2025, reaching 2,919,000 tonnes.

#Nonwovens

EDANA and more than 70 industry organisations call for consistent exemptions in EU packaging regulation

EDANA, together with more than 70 industry associations and organisations, has issued a joint statement commenting on the European Commission’s Delegated Act under Article 29 of the Packaging and Packaging Waste Regulation (PPWR).

More News on Nonwovens

#ITM 2026

Uster FiberQ excels for recycled raw materials too

Uster FiberQ is a complete solution for raw material utilization, supporting spinners to achieve consistent quality and profitability every day, building further growth for the future. The Turkish company ORTA relies on FiberQ with recycled yarn for its denim production. Data-driven knowledge puts the producer in control of raw material utilization – ready to make the correct decisions for process efficiency, quality and productivity.

#INDEX 2026

“We clearly see that reliability, flexibility, service and total cost of ownership are becoming increasingly important again.”

The nonwovens industry continues to face a challenging market environment. Nevertheless, AUTEFA Solutions reports successful projects, new line sales and growing demand for energy-efficient and flexible solutions. In this interview, André Imhof of AUTEFA Solutions talks about competitiveness against Chinese suppliers, new service and recycling concepts, the growing importance of application development and the opportunities created by countercyclical investments.

#INDEX 2026

“Needle punching technology is more universal and sustainable than ever!”

Needle punching technology was long regarded as a rather traditional and comparatively slow technology within the nonwovens industry. In this interview, Johann Philipp Dilo explains why needle punching is more relevant than ever today – ranging from energy efficiency and resource conservation to hygiene applications, new machine concepts and design-oriented nonwoven solutions.

Latest News

#INDEX 2026

INDEX 2026: Reicofil introduces RF 5.10 upgrade boosting output by 10 percent

At INDEX 2026, Reifenhäuser Reicofil will present its latest developments for the nonwovens industry under the guiding themes “Grow Together”, “Expand Together” and “Transform Together”. On this occasion, the leading manufacturer of nonwoven machinery will be unveiling two brand-new technology advancements – RF 5.10 upgrade and RF Core – at the show.

#Recycled Fibers

Lindex and BASF partner to bring textile-­to­-textile recycled polyamide to lingerie sector

Lindex has partnered with BASF’s loopamid® to accelerate textile-­to-­textile recycling and advance the shift towards more circular material solutions in the fashion industry. Together they introduce loopamid to the lingerie sector.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

#Digital Printing

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

TOP