[pageLogInLogOut]

#Research & Development

ITMF International cooperation award 2024 goes to the DITF and RBX Créations

The International Textile Manufacturers Federation (ITMF) announced the winners of the ITMF Awards 2024 at the ITMF & IAF Conference 2024 held in Samarkand, Uzbekistan, 8-10 September. In the "ITMF International Cooperation Award 2024" category, the DITF received the award together with the French company RBX Créations for the introduction of a newly developed hemp-based pulp and its further processing into filament-spun cellulose fibres.
Presentation of the ITMF Award to Dr. Marc Vocht (DITF) and Anne Reboux (RBX Créations) at the ITMF Conference in Samarkand. Photo: ITMF
Presentation of the ITMF Award to Dr. Marc Vocht (DITF) and Anne Reboux (RBX Créations) at the ITMF Conference in Samarkand. Photo: ITMF


New fibers and textile products from hemp - with the presentation of an innovative production line, the cooperation partners DITF and RBX Créations are focusing on the concept of sustainability in the textile value chain. The raw material hemp is obtained from local cultivation, and further processing into textile fibers, yarns and fabrics made of cellulose is carried out using energy- and resource-saving processes.

With this in mind, the two partners successfully presented themselves at the ITMF & IAF Conference 2024 in Samarkand, Uzbekistan. Together, they presented a complete textile production chain to the audience and the jury - from raw materials to processing, spinning technology and the realization of textile products.

Even the choice of hemp as a raw material is beneficial to the environment in many ways: it is grown locally and therefore has a low carbon footprint: This is because wood is usually used as a raw material for the production of cellulose fibers, and long transportation routes are accepted for its processing. The cultivation of hemp is characterized by low water consumption, little or no use of chemicals due to high resistance to plant diseases, and beneficial properties for soil regeneration.

Industrial hemp is processed into a fine-fibred pulp in a process patented by RBX Créations. It serves as the raw material for a wet spinning process developed at the DITF and patented under the name HighPerCell®. The hemp pulp is dissolved in an ionic liquid. The solution is spun into cellulose fibers in a precipitation bath. The solvent can be completely recovered and reused - a highly sustainable and environmentally friendly production process. Hemp-based cellulose fibers have impressive mechanical properties, some of which are even better than those of established wood-based fibers. This makes them ideal for mechanical processing in knitting and weaving.

The project partner RBX Création has not only developed the processes for the preparation of the raw materials, but also manages the further processing of the fibers after production: thanks to its excellent network in the textile industry, RBX Création is responsible for the preparation of the yarns and coordinates the distribution of tasks with the textile manufacturing companies. The yarns and textile materials are marketed by RBX Création under the name Iroony™. Knitted and woven fabrics have already been produced from this material. Whether for clothing or technical applications, hemp-based materials have a wide range of uses and great development potential.

The award ceremony in Samarkand recognizes the entire manufacturing process: a new and sustainable process for the production of natural fibers is controlled in a company and research cooperation from the cultivation of the raw material to the final product. The collaboration shows how sustainability in textile production can lead to new and marketable products.



More News from Deutsche Institute für Textil- und Faserforschung Denkendorf

#Research & Development

More safety and comfort for protective clothing thanks to auxetic fabrics

When everyday materials are pulled, they stretch or elongate in the direction of the pull and become narrower in cross-section. We can also observe this property in two-dimensional textiles. Auxetic structures behave differently here. They have the striking property of not changing under tensile stress or even increasing their width or thickness. These properties are advantageous, for example, in protective textiles or textile filter media. The DITF are researching auxetic fabrics for various applications.

#Research & Development

Panty liners prevent bacterial vaginosis

Worldwide, almost one third of women of childbearing age suffer from bacterial vaginosis. This is when the sensitive microbiome of the vagina becomes unbalanced. Such a disorder of the vaginal flora can cause urogenital infections, abscesses on the ovaries or fallopian tubes or premature births. This significantly increases the risk of infertility in women and of contracting a sexually transmitted disease or HIV.

#Research & Development

DITF send a signal for climate protection

The German Institutes of Textile and Fiber Research Denkendorf (DITF) have successfully implemented extensive investments in photovoltaic systems at their site in Denkendorf. The systems installed on the roofs of the buildings and covered parking lots have a total installed capacity of 840 kilowatt peak (kWp). The DITF invested 1.6 million euros in this with the support of the state of Baden-Württemberg. The system was ceremonially put into operation on September 17, 2025.

#Research & Development

4.2 million Euros for research into textile recycling

Around the world, used textiles are still rarely recycled and pile up into huge mountains of waste. A recent study by the Boston Consulting Group (BCG) drew attention to this problem. However, the low recycling rate is also due to the fact that only a small percentage of used textiles are actually suitable for recycling into high-quality materials and for demanding applications. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are addressing this problem with their research.

More News on Research & Development

#Research & Development

Fraunhofer CCPE presents the “Monomaterial Design Set” – Innovative solutions for circular product design

Composite materials made from different types of plastic often extend the lifetime of products but make recycling more difficult in the circular economy. That is why Fraunhofer CCPE has developed the “Monomaterial Design Set”. This new approach helps to reduce the variety of plastics used in durable products and offers circular solutions for designers and product developers.

#Research & Development

How innovations drive BASF’s success

“Innovation has always been part of BASF’s DNA. Especially in these volatile times, it is crucial to leverage our innovative strength to develop competitive solutions that differentiate us as a company in our markets and give us a competitive edge,” said Dr. Stephan Kothrade, Member of the Board of Executive Directors of BASF and Chief Technology Officer, at the company’s Research Press Briefing held today. To achieve this, BASF implemented its “Winning Ways” strategy about a year ago with the clear goal of becoming the preferred chemical company to enable its customers’ green transformation.

#Research & Development

Small tolerances, big impact and a recyclable alternative to elastane

ITA Master's student Janne Warnecke investigated tension differences over the fabric width in the weaving process and thereby contributed to quality assurance; ITA Bachelor's student Jasmin Roos found a basis for the development of recyclable yarns and textiles. For these developments, they were awarded the Walter Reiners Foundation's Promotion and Sustainability Prizes on 27 November. Peter D. Dornier, Chairman of the Walter Reiners Foundation, presented the awards at the Aachen-Dresden-Denkendorf International Textile Conference (ADD-ITC) in Aachen, Germany.

#Associations

Young researchers recognised for cutting-edge work in recycling, fibre technology and textile mechanics

At the Aachen-Dresden-Denkendorf International Textile Conference held in Aachen at the end of November, Peter D. Dornier, Chairman of the Walter Reiners Foundation of the VDMA, honoured five successful young engineers. Promotion and sustainability prizes were awarded in the categories bachelor/project theses and diploma/master theses. Academic theses that develop solutions for resource-saving products and technologies, for example, are eligible for the sustainability awards.

Latest News

#People

Happy Holidays!

Dear reader, the year 2025 is drawing to a close. We are entering what we hope will be a peaceful holiday season, spending time with our families and taking a moment to pause and reflect. We hope we have been able to support you once again this year with relevant news and articles, and we look forward to surprising you with many innovations in the coming year. Enjoy the festive season, stay healthy, and we wish you a happy and joyful holiday season.

#Weaving

Lindauer Dornier announces leadership transition in weaving machine business

After more than ten successful years at Lindauer DORNIER GmbH, Mr Wolfgang Schöffl will leave the family-owned company at the end of the year to enter well-deserved retirement.

#Heimtextil 2026

Texpertise Focus AI: Messe Frankfurt puts Artificial Intelligence centre stage at its international textile and apparel trade fairs

Under the banner 'Texpertise Focus AI, Messe Frankfurt will place a strong emphasis on Artificial Intelligence (AI) across its international textile and apparel trade fairs from 2026 onwards, setting a future-shaping signal for the industry. The initiative highlights the responsible use of AI along the entire textile value chain, from fibre production to the point of sale. The programme will launch at Heimtextil in Frankfurt in January 2026.

#Technical Textiles

Autoneum and Polestar set new benchmarks for passenger experience and sustainability

As the global market leader in sustainable acoustic and thermal management, Autoneum is a key supplier of interior and exterior components for the highly anticipated Polestar 5 model. The successful collaboration between Autoneum and Polestar marks a significant milestone in sustainable automotive engineering: the electric grand tourer sports car features several innovations in lightweight, fully recyclable polyester-based components that ensure a superior driving experience. Polestar 5 was revealed at the IAA Mobility 2025 in Munich and is available in 24 markets.

TOP