[pageLogInLogOut]

#ITMA Asia + CITME Singapore 2025

All systems go for Sweden’s imogo in Singapore

The Dye-Max system at imogo’s new showroom in Sweden © 2025 imogo
With a new strategic partner, its showroom now open in Sweden, and the successful commissioning of a Dye-Max spray dyeing system for a key H&M supplier in Bangladesh, imogo is looking to make a splash at next week’s ITMA Asia+CITME in Singapore (October 28-31).


Compared to conventional jet dyeing, impressive savings can be achieved with imogo’s Dye-Max, which is based on a series of spray cassettes with precision nozzles for accurate and consistent coverage combined with a patented pro-speed valve that controls the volume to be applied.

“The savings in treatment water the Dye-Max achieves are due to the extremely low liquor ratio of 0.5 litres per kilo of fabric,” explains imogo executive partner and board member Christian Moore. “At the same time, the low liquor ratio and the spray process require considerably less auxiliary chemistry to start with, and all of it is used in the process, which also greatly reduces the production of waste water, with only 20 litres being required for wash at changeovers. The low liquid content in the fabric meanwhile minimises the energy needed for fixation, while meeting industry quality standards and maintaining superior fabric performance.” 

The Dye-Max machine operates without the need for any changes to existing dyeing installations and employs traditional dyes suitable for application at room temperature. 

Blåkläder backing

In addition to ACG Kinna with whom it will share exhibition space in Singapore (stand D106 in Hall 6), imogo now has the support of Swedish workwear specialist Blåkläder.

With fully owned factories in Sri Lanka, Myanmar and Bangladesh, more than 8,000 employees and an annual turnover of SEK 2.7 billion, Blåkläder is one of the world’s leading manufacturers of quality workwear.

Blåkläder already uses dope dyeing, which reduces resource use in the dyeing of synthetic materials such as polyester, while imogo’s technology can also be used for natural fibres such as cotton, linen and viscose.

“Since most of the environmental impact from clothing occurs during manufacturing, it’s vital to develop methods that reduce resource consumption,” says Anders Carlsson, MD of Blåkläder. “Imogo’s groundbreaking technology addresses several of the industry’s toughest sustainability challenges and we naturally want to support that.

“Ninety percent of all the fabric we use comes from only ten carefully selected textile producers and by building long-term, trust-based relationships with them, we are well placed to influence sustainability efforts throughout the value chain.”

New showroom

Imogo’s new showroom and test centre is meanwhile now open and available for demonstrations and trials at the dyehouse of 7H Färgeri in Kinnahult, Sweden

“With this showroom, we are creating a platform for dialogue and collaboration with textile producers, brands and research partners,” says imogo CEO Joacim Wellander. “It enables visitors to see the technology in operation, understand the business impact and explore how innovation can drive transformation in their value chain.”

The facility will also serve as a knowledge hub, supporting technical training, application testing and joint development projects with partners. 

Chorka Textile

In Bangladesh, imogo has successfully installed a Dye-Max system at the plant of Chorka Textile, as part of retail giant H&M’s Green Fashion Initiative to support its key suppliers.

“The installation was handled by our own team and quality results were quickly achieved,” says Christian Moore. “This installation clearly proves that our technology is ready for the global market after years of development and fine-tuning, and working in Bangladesh taught us a lot. We look forward to discussing the opportunities that our technology can provide to mills around the world in Singapore.”




More News from imogo

More News on ITMA Asia + CITME Singapore 2025

#ITMA Asia + CITME Singapore 2025

India becomes growth engine for the warp knitting industry

ITMA ASIA 2025 exceeded all expectations for KARL MAYER – above all thanks to the strong interest from India: around 30% of the qualified discussions were held with partners from this traditional textile country. The response underlines the growing importance of the Indian market, which could become the second largest sales region for KARL MAYER after China. The warp knitting industry in particular is developing dynamically.

#India ITME 2026

India ITME Society pushes trade & technology alliances in Singapore

India ITME Society hosted India Networking Program - Fabricating the Future of Textile Industry- From Heritage to High-Tech” on 29th October 2025 at Singapore an exclusive gathering of Ministry of Textile Officials, Embassy Officials, Entrepreneurs, Technocrats, Industry Organizations and Media Personnel's designed to foster collaboration, exchange ideas and explore opportunities in the Indian Textile & Textile Engineering Sector.

#ITMA Asia + CITME Singapore 2025

Innovation and customer proximity – KARL MAYER’s clear focus makes an impression

ITMA ASIA in Singapore was a resounding success for KARL MAYER, exceeding all expectations. The company welcomed visitors from 39 countries and held around 570 expert discussions. Most guests came from India, followed by China, Indonesia and Pakistan. The exchange with them was both well-founded and targeted. Conversation topics ranged from investment projects and new technologies to opportunities for cooperation and business expansion.

#ITMA Asia + CITME Singapore 2025

Singapore edition of ITMA ASIA + CITME makes successful presentation

The region’s leading textile and garment technology exhibition, ITMA ASIA made a successful return to Singapore after two presentations in 2001 and 2005.

Latest News

#People

Happy Holidays!

Dear reader, the year 2025 is drawing to a close. We are entering what we hope will be a peaceful holiday season, spending time with our families and taking a moment to pause and reflect. We hope we have been able to support you once again this year with relevant news and articles, and we look forward to surprising you with many innovations in the coming year. Enjoy the festive season, stay healthy, and we wish you a happy and joyful holiday season.

#Weaving

Lindauer Dornier announces leadership transition in weaving machine business

After more than ten successful years at Lindauer DORNIER GmbH, Mr Wolfgang Schöffl will leave the family-owned company at the end of the year to enter well-deserved retirement.

#Heimtextil 2026

Texpertise Focus AI: Messe Frankfurt puts Artificial Intelligence centre stage at its international textile and apparel trade fairs

Under the banner 'Texpertise Focus AI, Messe Frankfurt will place a strong emphasis on Artificial Intelligence (AI) across its international textile and apparel trade fairs from 2026 onwards, setting a future-shaping signal for the industry. The initiative highlights the responsible use of AI along the entire textile value chain, from fibre production to the point of sale. The programme will launch at Heimtextil in Frankfurt in January 2026.

#Technical Textiles

Autoneum and Polestar set new benchmarks for passenger experience and sustainability

As the global market leader in sustainable acoustic and thermal management, Autoneum is a key supplier of interior and exterior components for the highly anticipated Polestar 5 model. The successful collaboration between Autoneum and Polestar marks a significant milestone in sustainable automotive engineering: the electric grand tourer sports car features several innovations in lightweight, fully recyclable polyester-based components that ensure a superior driving experience. Polestar 5 was revealed at the IAA Mobility 2025 in Munich and is available in 24 markets.

TOP