[pageLogInLogOut]

#Recycling / Circular Economy

EuRIC and FEAD point at ELV regulation to protect recycling and boost circularity

Creating a circular automotive sector requires more than just commitments; it demands a robust regulatory framework that promotes fair, transparent practices and ensures the uptake of recycled materials.


EuRIC and FEAD believe the upcoming End-of-Life Vehicles Regulation (ELVR) is the right opportunity to set the right safeguards that prevent practices which hinder competition, circularity, and recyclers’ efforts to recover materials – thereby supporting Europe’s competitiveness and futureproofing recycling and circularity. To achieve this, EuRIC and FEAD urge policymakers to:

Establish independent oversight to monitor the operations of producers and their Producer Responsibility Organisations (PROs) to prevent potential market distortions and conflicts of interest.

Recognise that Extended Producer Responsibility (EPR) schemes are not the silver bullet. Where EPR schemes are already in place, the entire recycling value chain, from Authorised Treatment Facilities (ATFs) to mechanical recyclers (equipped with shredding and post-shredding technologies), must be included in the governance to ensure effective and transparent recycling practices.

Ensure that manufacturers cover the full costs of ELV recycling, including dismantling and treatment, with recyclers keeping ownership of the valuable parts and materials recovered.

While transparency and fair practices are critical to protect recyclers and waste operators, true circularity in automotive is still a long way off. To secure investments in high-quality recycling and the uptake of recycled materials that boost circularity, EuRIC and FEAD strongly call for:

Maintaining the 25% recycled content target for plastics in ELVs, as proposed by the Commission. This target is both realistic and verified, and should be based on post-consumer waste, excluding pre-consumer waste and biobased plastics, which could strongly undermine its effectiveness.

Introducing a mandatory recycled content target for steel in automotive, as steel remains the leading material in vehicle production. This target would drive investment and improve the quality of steel recovered from ELVs.

The recent announcement of Commission decision against car manufacturers and ACEA shows the need for change. To protect recyclers’ efforts, boost circularity, and guarantee the use of recycled materials, the EU must act decisively. The upcoming End-of-Life Vehicles Regulation (ELVR) is a key opportunity to set the rules for fairness, transparency, and long-term circularity in the automotive sector.



More News from Recycling Europe (ex EuRIC AISBL)

More News on Recycling / Circular Economy

#Recycled Fibers

Lindex and BASF partner to bring textile-­to­-textile recycled polyamide to lingerie sector

Lindex has partnered with BASF’s loopamid® to accelerate textile-­to-­textile recycling and advance the shift towards more circular material solutions in the fashion industry. Together they introduce loopamid to the lingerie sector.

#ITM 2026

BB Engineering unveils new, patented “Val-uePack” spin pack at ITM

At the upcoming ITM in Istanbul, taking place June 9–13 at the Tüyap Fair Convention and Congress Center in Hall 7, Booth 702B, BB Engineering will once again be represented at a joint booth with its parent company, Barmag, and its representative, Tekstil Servis. The German machine manufacturer will show-case its expertise in man-made fiber and recycling technology, presenting its entire product portfolio, which includes compo-nents such as extruders and filters, as well as complete sys-tems for spinning synthetic fibers, air-texturing, and PET recy-cling.

#Recycled Fibers

Syre expands partnership with Target to advance next-generation recycled materials at scale

Advancing next-generation materials to support scalable circular solutions across global retail Stockholm, May 2026 — Syre, the textile impact company hyperscaling textile-to-textile recycling today announced an expanded collaboration with Target to accelerate the adoption of next-generation recycled materials across retail at scale.

#Recycling / Circular Economy

Project REWEAR investigates diverse economies of rewear as a global practice of circularity

Every year, European households discard millions of tonnes of clothing. Around a quarter of what gets separately collected is exported, much of it classified as rewearable. A significant share ends up in markets like Kantamanto in Accra, Ghana, where an estimated 15 million garments arrive every week. New research published today reveals what happens when that clothing arrives.

Latest News

#INDEX 2026

INDEX 2026: Reicofil introduces RF 5.10 upgrade boosting output by 10 percent

At INDEX 2026, Reifenhäuser Reicofil will present its latest developments for the nonwovens industry under the guiding themes “Grow Together”, “Expand Together” and “Transform Together”. On this occasion, the leading manufacturer of nonwoven machinery will be unveiling two brand-new technology advancements – RF 5.10 upgrade and RF Core – at the show.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

#ITM 2026

Uster FiberQ excels for recycled raw materials too

Uster FiberQ is a complete solution for raw material utilization, supporting spinners to achieve consistent quality and profitability every day, building further growth for the future. The Turkish company ORTA relies on FiberQ with recycled yarn for its denim production. Data-driven knowledge puts the producer in control of raw material utilization – ready to make the correct decisions for process efficiency, quality and productivity.

#Digital Printing

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

TOP