[pageLogInLogOut]

#Recycling / Circular Economy

Europe’s textile future at a turning point: New 2030 Circularity Blueprint aims to scale recycling and unlock investment opportunities

Presentation of the Blueprint at the Global Fashion Summit in Copenhagen © 2026 GFA
The EU textile system is at a critical crossroads. Today, less than 1% of discarded garments are recycled into new garments, despite EU-wide obligations for separate collection. In response, Global Fashion Agenda (GFA) is launching the 2030 Circularity Blueprint, in partnership with ReHubs. This ambitious initiative is designed to support the transformation of the EU textile ecosystem to advance textile-to-textile recycling and drive the transition to a circular economy.

The Blueprint will be officially presented at the Global Fashion Summit: Copenhagen Edition on 6 May - one of the world’s leading forums for sustainability in fashion - bringing together industry leaders, policymakers, and innovators to accelerate collective action.

Building on the ambitions of GFA’s 2020 Circular Fashion System Commitment and grounded in robust industry and value chain engagement, the Blueprint identifies and addresses the systemic fragmentation that has long hindered progress. It introduces a coordinated roadmap to close collection gaps, align stakeholders, and unlock the estimated €8–11 billion Capital Expenditure required to build Europe’s textile-to-textile recycling infrastructure.

Accelerating system-level change

The 2030 Circularity Blueprint sets out a clear implementation pathway - presenting eight interconnected intervention areas that have been designed to address systemic barriers in a coordinated way:

Systemic Conditions:

  • Shared Framework for Circular & Sustainable Materials
  • Textile Waste Intelligence Platform
  • Demand Signal Initiative: Long-Term Offtake Commitments

Value Chain Interventions

  • Designing for the Loop: Circularity at Product Design Stage
  • Closing the Collection Gap: Effective Textile Collection Systems
  • Closing the Sorting Investment Gap: Demand Certainty for Sorters
  • Pre-Sorting & Feedstock Preparation: Regional Hub Infrastructure
  • Recycling Infrastructure at Scale: A Coordinated CAPEX Roadmap

Learn more about the intervention areas here:

https://globalfashionagenda.org/2030-circularity-blueprint/

When implemented correctly, the eight interventions are designed to create a system that turns voluntary ambition into investment-grade infrastructure and scalable industrial capacity by 2030, with the ambition to reach a target of 2.7 million tonnes of textile-to-textile recycling capacity by 2035.

As part of the 2030 Circularity Blueprint, GFA and ReHubs will bring two collaborative programmes to life. The first, led by ReHubs, centres on the 'Textile Waste Intelligence Platform'. The second tackles the critical challenge of closing the collection and sorting gap.

© 2026 GFA
© 2026 GFA


A collaborative path forward

The 2030 Circularity Blueprint is designed as a dynamic, collaborative ecosystem, bringing together stakeholders across the value chain to co-create solutions, share ownership, and track progress. It will require coordinated, cohesive effort from all stakeholders - across brands, sorters, recyclers, infrastructure operators, and policymakers - working in alignment rather than in parallel. The intervention areas will be advanced in partnership with other organisations ready to lead and invest.

Call to Action:

GFA and ReHubs are actively seeking funding, partnerships, and contributions to bring the full 2030 Circularity Blueprint to life. Organisations are invited to lead and support the remaining intervention areas critical to achieving Europe’s circular textile ambitions.

To further catalyse progress, GFA is issuing a Call to Action for a Targeted Policy Incentive Framework, with concrete suggestions on how to unlock the secondary raw materials market in the EU. While demand for recycled feedstock is rising, cost remains a key barrier: recycled inputs currently command a premium ranging from approximately 20% to as much as double the price of virgin materials. Addressing this will require stronger demand through public procurement, more harmonised and fit-for-purpose Extended Producer Responsibility (EPR) systems across countries, clearer requirements for the use of recycled materials, and increased investment in recycling infrastructure.

Recognising that scaling circular textiles requires aligning economic drivers with policy ambition, the proposal sets out targeted incentive measures across EU legislative and financial instruments. It urges the European Commission to integrate these across existing and forthcoming frameworks, while encouraging Member States to operationalise them at national level, ensuring that circular solutions can compete and scale in practice.

Federica Marchionni, CEO, GFA, says: "The vision for a textile circular economy is clear, and innovation is gaining ground. Yet progress is stalled by supply–demand deadlocks, compounded by a fragmented landscape where initiatives and stakeholders operate in silos, often unaware of their interdependence. Furthermore, without precise incentives to align efforts and investment, progress cannot move at the pace required.

Evan Wiener, Interim COO and Board Advisor to ReHubs, says: “Unlocking textile circularity at scale requires the full value chain to move together. ReHubs brings leading organisations from across the textile recycling value chain to the same table to align interests, orchestrate investment, and turn fragmented efforts into a functioning ecosystem. This collaborative initiative directly supports our strategy to industrialise textile-to-textile recycling and break the supply–demand deadlock at scale.”

The 2030 Circularity Blueprint aims to change that—identifying key bottlenecks and leveraging interconnections to unlock the potential of the circular value chain: turning ambition into tangible progress.

View the Call to Action for a Targeted Policy Incentive Framework here:

https://globalfashionagenda.org/resource/gfas-call-to-action/



More News from Global Fashion Agenda

More News on Recycling / Circular Economy

#Recycled Fibers

Lindex and BASF partner to bring textile-­to­-textile recycled polyamide to lingerie sector

Lindex has partnered with BASF’s loopamid® to accelerate textile-­to-­textile recycling and advance the shift towards more circular material solutions in the fashion industry. Together they introduce loopamid to the lingerie sector.

#ITM 2026

BB Engineering unveils new, patented “Val-uePack” spin pack at ITM

At the upcoming ITM in Istanbul, taking place June 9–13 at the Tüyap Fair Convention and Congress Center in Hall 7, Booth 702B, BB Engineering will once again be represented at a joint booth with its parent company, Barmag, and its representative, Tekstil Servis. The German machine manufacturer will show-case its expertise in man-made fiber and recycling technology, presenting its entire product portfolio, which includes compo-nents such as extruders and filters, as well as complete sys-tems for spinning synthetic fibers, air-texturing, and PET recy-cling.

#Recycled Fibers

Syre expands partnership with Target to advance next-generation recycled materials at scale

Advancing next-generation materials to support scalable circular solutions across global retail Stockholm, May 2026 — Syre, the textile impact company hyperscaling textile-to-textile recycling today announced an expanded collaboration with Target to accelerate the adoption of next-generation recycled materials across retail at scale.

#Recycling / Circular Economy

Project REWEAR investigates diverse economies of rewear as a global practice of circularity

Every year, European households discard millions of tonnes of clothing. Around a quarter of what gets separately collected is exported, much of it classified as rewearable. A significant share ends up in markets like Kantamanto in Accra, Ghana, where an estimated 15 million garments arrive every week. New research published today reveals what happens when that clothing arrives.

Latest News

#INDEX 2026

INDEX 2026: Reicofil introduces RF 5.10 upgrade boosting output by 10 percent

At INDEX 2026, Reifenhäuser Reicofil will present its latest developments for the nonwovens industry under the guiding themes “Grow Together”, “Expand Together” and “Transform Together”. On this occasion, the leading manufacturer of nonwoven machinery will be unveiling two brand-new technology advancements – RF 5.10 upgrade and RF Core – at the show.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

#ITM 2026

Uster FiberQ excels for recycled raw materials too

Uster FiberQ is a complete solution for raw material utilization, supporting spinners to achieve consistent quality and profitability every day, building further growth for the future. The Turkish company ORTA relies on FiberQ with recycled yarn for its denim production. Data-driven knowledge puts the producer in control of raw material utilization – ready to make the correct decisions for process efficiency, quality and productivity.

#Digital Printing

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

TOP