[pageLogInLogOut]

#Recycling / Circular Economy

Rieter and partners launch Recycling Powerhouse for industrial-scale textile recycling

Recycling Powerhouse Ltd. was established in July 2026 to industrialize, standardize and scale textile recycling. Based in Switzerland, the venture will operate a franchise-driven business model that enables the production of high-quality, certified recycled yarns. The project is supported by the following partners: Rieter Group, the world’s leading system supplier for natural and man-made fibers, Säntis Textiles, a Swiss textile engineering company, and Valvan, a Belgian sorting technology company. The first blueprint franchise operation is scheduled to launch early 2027 in partnership with Suhail Industrial Holding Group in Qatar.

The global textile industry is undergoing a fundamental transformation. Rising volumes of textile waste, increasing regulatory pressure and growing demand for sustainable products are accelerating the need for scalable circular solutions. Textile-to-textile recycling is not new, yet less than 1% of used textiles are recycled back into new ones. This is primarily due to technological complexity, the availability of low-cost virgin materials and often fragmented, hard-to-verify recycling claims in the market. Over the coming years, Recycling Powerhouse intends to industrialize, standardize and scale textile recycling by establishing a global network of textile recycling plants capable of converting post- and pre-consumer textile waste into certified recycled yarns on an unprecedented industrial scale.

Recycling Powerhouse will act as a global integrator and franchisor across the textile recycling value chain, providing standardized recycling concepts, technologies, operating procedures, digital solutions, audit services and technical support to franchise partners worldwide. Franchise partners will gain access to Recycling Powerhouse’s proven recycling solutions, engineering know-how, training programs and operational support systems. Yarns produced by franchisees will be marketed under an established brand. Recycling Powerhouse will ensure quality through auditing, certification and full end-to-end traceability across the value chain.

As part of this venture, Rieter is contributing its tearing and spinning expertise for short-staple fibers. The tearing machine converts fabric clips into fibers preserving fiber quality far better than conventional technologies – a critical factor in enabling industrial-scale recycling and high-quality yarn production. The tearing machine complements Rieter’s end-to-end spinning systems technology.

Valvan, a global leader in sorting technology, contributes leading textile sorting equipment and know-how, including the automated and AI-based textile sorting machine Fibersort, as well as Trimclean, a system designed to prepare fabric clips for tearing.

The first recycling blueprint facility and franchise operation will launch in early 2027 in Qatar in cooperation with Suhail Industrial Holding Group. Suhail has firmly established itself as a leader in the recycling of metals, steel and plastic in the Middle East and other regions, and with this move is extending its operations into textile recycling. The facility will serve as a global reference model, demonstrating how industrial-scale textile recycling can become commercially viable while supporting circular economy goals. Suhail Industrial Holding Group is already planning additional plants worldwide, with the ambition to become a global leader in textile recycling.

Noel Norking, Managing Director of Recycling Powerhouse: “Our mission is to make textile recycling simple, scalable and accessible to investors, so they can turn the textile industry’s tectonic shifts into monumental opportunity while helping to solve the world’s growing textile waste problem.”

Thomas Oetterli, CEO of Rieter Group: “With Recycling Powerhouse Ltd., we are bringing our greatest strengths to one of the world’s most pressing issues: textile waste. By combining leading-edge spinning technology, decades of recycling expertise and advanced traceability solutions, the venture creates a strategic platform to unlock new growth opportunities across machinery sales, engineering services, recycling technologies and recycled yarn markets.”

Stefan Hutter, owner of Säntis Textiles: “Yarn manufacturing is fundamental to successful textile-to-textile recycling. We will bring together the full know-how of Rieter’s systems technology to create a powerful yarn brand with real potential to transform textile recycling.”

Frank Vandeputte, owner of the Valvan Group: “At the heart of any effective recycling system is the ability to separate pure fractions from waste streams. We are proud to bring our advanced and specialized sorting technology to the textile industry and help pave the way to solving the global challenge of textile waste.”

Sheikh Khalid Ahmed Mubarak Al Thani, Chairman of Suhail Industrial Holding Group in Qatar: “Recycling Powerhouse brings together deep textile expertise and cutting-edge engineering to help us realize our vision of a sustainable, competitive and resilient future where there is no textile waste.”




More News from Rieter Textile Systems

#Spinning

Georg Stausberg, a veteran of the textile machinery industry, takes over as Rieter Group CEO

Georg Stausberg, one of the most experienced executives in the international textile machinery industry, has been appointed Chief Executive Officer of the Rieter Group with immediate effect from 4 November 2026. With more than three decades of industry experience and a long-standing leadership career at Barmag, Stausberg brings extensive technological expertise, international market knowledge and an established network across the global textile industry to his new position.

#Spinning

Rieter reports higher sales and order intake but lowers 2026 earnings outlook

Rieter achieved an order intake of CHF 951.4 million in the first nine months of 2026 (2025: CHF 559.3 million), up 70.1%. This growth is attributable to the first-time consolidation of the Man-Made Fiber Division. On an organic basis, order intake was 10.5% lower than the previous year.

#Spinning

Rieter appoints Daniel Lippuner as new CEO as Thomas Oetterli steps down

Thomas Oetterli has decided to step down from his function as CEO, effective October 31, 2026, and hand over the Chairmanship of the Board of Directors. “After the successful implementation of the Next Level performance program, the structural measures initiated to consolidate the sites and the acquisition of Barmag, the time has come to hand over responsibility to new hands,” explains Thomas Oetterli.

#Spinning

Rieter prepares leadership transition in Components & Technology

Roger Albrecht, Head of the “Components & Technology” Division, has decided to pursue a new opportunity outside the Rieter Group. Roger has worked for the Group for 11 years and has been instrumental in maintaining Rieter’s position as a technology leader in the short-staple business.

More News on Recycling / Circular Economy

#Recycling / Circular Economy

ReSpin founder Åsa Strandberg receives Innovation Champion of the Year 2026 award

Åsa Strandberg, founder and CEO of Swedish textile recycling company ReSpin AB, has been named Innovation Champion of the Year 2026. The award recognises her development of RespinJenny, a patented technology designed to recycle textile waste into new, high-quality fibres without using water, chemicals or additional virgin raw materials. The distinction was presented by the Olle Oscarsson Foundation and Axera Inkubator at Guldgalan in Sweden.

#Recycling / Circular Economy

Circulose resumes recycling of discarded cotton textiles and appoints interim CEO

Circulose today announced its restart of commercial-scale production plant at Ortviken in Sundsvall, Sweden, marking a significant step in scaling next-generation materials for the global fashion industry. The Ortviken plant is the world’s first commercial-scale chemical textile recycling facility. Its restart demonstrates that the fashion industry is seeking ways to scale proven solutions that move beyond pilots and into commercial production.

#Recycled Fibers

Reju expands textile-to-textile recycling network with six international fabric manufacturers

Reju, a textile-to-textile regeneration company, is expanding its industrial network through collaborations with six fabric manufacturers in Europe and the Americas. The initiative aims to accelerate the integration of regenerated polyester into textile manufacturing and support the development of finished fabrics for commercial applications.

#Recycling / Circular Economy

H&M Foundation highlights economic barriers to scaling circular textile systems

Discussions at Textile Exchange 2026 underline the need for coordinated investment, reliable material flows and a fair distribution of costs and risks across the textile recycling value chain.

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP