[pageLogInLogOut]

#Research & Development

Antiviral tests on protective clothing for infection control

Textiles functionalized with antiviral agents are intended to reduce the risk of transmission of pathogens, particularly in a medical environment. These antiviral properties must be carefully tested and verified in laboratory tests. The biological testing laboratory of the German Institutes of Textile and Fiber Research Denkendorf (DITF) has examined antiviral activities with coronaviruses as part of an interdisciplinary research project on textiles for infection control.
Cell seeding of host cells to determine the number of viruses. © 2025 DITF
Cell seeding of host cells to determine the number of viruses. © 2025 DITF


Viruses can survive on plastic surfaces or textiles for several hours to days. These surfaces therefore play an important role in the transmission of viruses as pathogens. Numerous studies were done on this topic during the SARS-CoV-2 pandemic. Textiles treated with antiviral agents can help to reduce this risk of transmission. This offers added value, especially for textiles used in medical environments.

In order to confirm these antiviral properties, laboratory tests are the state of the art and help to minimize trials in a medical environment. However, working with viruses is very complex and elaborate, as viruses cannot be proliferated on culture media like bacteria. By definition, viruses are not living organisms because they are dependent on host cells to replicate. For laboratory tests, this means that both technical expertise in microbiology and in cell culture technology must be combined for successful work. For laboratory activities involving human and animal pathogens, official authorization is required. The DITF biological testing laboratory is authorized for work with pathogens in accordance with the German Infection Protection Act and the Animal Pathogens Ordinance up to risk group 2. These are microorganisms that can cause disease in humans or animals which can be well controlled generally.

Intact host cells (NCTC) before virus contact (100 x). © 2025  DITF
Intact host cells (NCTC) before virus contact (100 x). © 2025 DITF
Cytopathic effects on host cells by viruses (100 x). © 2025 DITF
Cytopathic effects on host cells by viruses (100 x). © 2025 DITF


Usually test laboratories carry out antiviral tests with so-called bacteriophages because they are easier to handle. These viruses use bacteria as host cells to replicate. A different, more realistic approach was taken at the DITF as part of a research project. Here, antiviral activity was determined against a coronavirus. With the MHV virus, a corona virus was chosen that is genetically very closely related to the SARS-CoV-2 virus and uses eukaryotic cells as a host. Eukaryotic cells are cells with a nucleus such as those found in humans and animals. The test procedure for determining the antiviral efficacy against coronaviruses had to be adapted to both the viruses and the host cells. In case the host cells are infected by the viruses and used as a “replication machine”, these cells show damages, so-called cytopathic effects, which are clearly visible under the light microscope. The visible damages to the host cells are used to determine the number of viruses indirectly as they are not visible under the light microscope due to their very small size.

As part of the joint research project with Heraeus Precious Metals GmbH & Co. KG to develop antimicrobial protective clothing for infection control based on AGXX® technology, a test protocol was developed at the DITF biological laboratory to determine the antiviral activity against a coronavirus. A significant inactivation of MHV coronaviruses of more than 99 percent was demonstrated in textiles finished with AGXX®. The tests on the antiviral properties of textiles against a coronavirus make an important contribution to the development and quality control of antiviral textiles.



More News from Deutsche Institute für Textil- und Faserforschung Denkendorf

#Research & Development

More safety and comfort for protective clothing thanks to auxetic fabrics

When everyday materials are pulled, they stretch or elongate in the direction of the pull and become narrower in cross-section. We can also observe this property in two-dimensional textiles. Auxetic structures behave differently here. They have the striking property of not changing under tensile stress or even increasing their width or thickness. These properties are advantageous, for example, in protective textiles or textile filter media. The DITF are researching auxetic fabrics for various applications.

#Research & Development

Panty liners prevent bacterial vaginosis

Worldwide, almost one third of women of childbearing age suffer from bacterial vaginosis. This is when the sensitive microbiome of the vagina becomes unbalanced. Such a disorder of the vaginal flora can cause urogenital infections, abscesses on the ovaries or fallopian tubes or premature births. This significantly increases the risk of infertility in women and of contracting a sexually transmitted disease or HIV.

#Research & Development

DITF send a signal for climate protection

The German Institutes of Textile and Fiber Research Denkendorf (DITF) have successfully implemented extensive investments in photovoltaic systems at their site in Denkendorf. The systems installed on the roofs of the buildings and covered parking lots have a total installed capacity of 840 kilowatt peak (kWp). The DITF invested 1.6 million euros in this with the support of the state of Baden-Württemberg. The system was ceremonially put into operation on September 17, 2025.

#Research & Development

4.2 million Euros for research into textile recycling

Around the world, used textiles are still rarely recycled and pile up into huge mountains of waste. A recent study by the Boston Consulting Group (BCG) drew attention to this problem. However, the low recycling rate is also due to the fact that only a small percentage of used textiles are actually suitable for recycling into high-quality materials and for demanding applications. The German Institutes of Textile and Fiber Research Denkendorf (DITF) are addressing this problem with their research.

More News on Research & Development

#Research & Development

Fraunhofer CCPE presents the “Monomaterial Design Set” – Innovative solutions for circular product design

Composite materials made from different types of plastic often extend the lifetime of products but make recycling more difficult in the circular economy. That is why Fraunhofer CCPE has developed the “Monomaterial Design Set”. This new approach helps to reduce the variety of plastics used in durable products and offers circular solutions for designers and product developers.

#Research & Development

How innovations drive BASF’s success

“Innovation has always been part of BASF’s DNA. Especially in these volatile times, it is crucial to leverage our innovative strength to develop competitive solutions that differentiate us as a company in our markets and give us a competitive edge,” said Dr. Stephan Kothrade, Member of the Board of Executive Directors of BASF and Chief Technology Officer, at the company’s Research Press Briefing held today. To achieve this, BASF implemented its “Winning Ways” strategy about a year ago with the clear goal of becoming the preferred chemical company to enable its customers’ green transformation.

#Research & Development

Small tolerances, big impact and a recyclable alternative to elastane

ITA Master's student Janne Warnecke investigated tension differences over the fabric width in the weaving process and thereby contributed to quality assurance; ITA Bachelor's student Jasmin Roos found a basis for the development of recyclable yarns and textiles. For these developments, they were awarded the Walter Reiners Foundation's Promotion and Sustainability Prizes on 27 November. Peter D. Dornier, Chairman of the Walter Reiners Foundation, presented the awards at the Aachen-Dresden-Denkendorf International Textile Conference (ADD-ITC) in Aachen, Germany.

#Associations

Young researchers recognised for cutting-edge work in recycling, fibre technology and textile mechanics

At the Aachen-Dresden-Denkendorf International Textile Conference held in Aachen at the end of November, Peter D. Dornier, Chairman of the Walter Reiners Foundation of the VDMA, honoured five successful young engineers. Promotion and sustainability prizes were awarded in the categories bachelor/project theses and diploma/master theses. Academic theses that develop solutions for resource-saving products and technologies, for example, are eligible for the sustainability awards.

Latest News

#People

Happy Holidays!

Dear reader, the year 2025 is drawing to a close. We are entering what we hope will be a peaceful holiday season, spending time with our families and taking a moment to pause and reflect. We hope we have been able to support you once again this year with relevant news and articles, and we look forward to surprising you with many innovations in the coming year. Enjoy the festive season, stay healthy, and we wish you a happy and joyful holiday season.

#Weaving

Lindauer Dornier announces leadership transition in weaving machine business

After more than ten successful years at Lindauer DORNIER GmbH, Mr Wolfgang Schöffl will leave the family-owned company at the end of the year to enter well-deserved retirement.

#Heimtextil 2026

Texpertise Focus AI: Messe Frankfurt puts Artificial Intelligence centre stage at its international textile and apparel trade fairs

Under the banner 'Texpertise Focus AI, Messe Frankfurt will place a strong emphasis on Artificial Intelligence (AI) across its international textile and apparel trade fairs from 2026 onwards, setting a future-shaping signal for the industry. The initiative highlights the responsible use of AI along the entire textile value chain, from fibre production to the point of sale. The programme will launch at Heimtextil in Frankfurt in January 2026.

#Technical Textiles

Autoneum and Polestar set new benchmarks for passenger experience and sustainability

As the global market leader in sustainable acoustic and thermal management, Autoneum is a key supplier of interior and exterior components for the highly anticipated Polestar 5 model. The successful collaboration between Autoneum and Polestar marks a significant milestone in sustainable automotive engineering: the electric grand tourer sports car features several innovations in lightweight, fully recyclable polyester-based components that ensure a superior driving experience. Polestar 5 was revealed at the IAA Mobility 2025 in Munich and is available in 24 markets.

TOP