[pageLogInLogOut]

#Recycling / Circular Economy

Closing the Loop in the Textile Industry: Value Creation in the State of Brandenburg

Towards a circular textile economy: A study shows that polyester-containing textile waste can be converted into bioplastic © 2025 Beneficial Design Institute GmbH
How can the state of Brandenburg benefit from a circular textile industry? This question is addressed in the new policy paper "Closing the loop in the textile industry: Value creation in the state of Brandenburg." Based on the „TexPHB“ feasibility study funded by the Brandenburg Ministry of Climate Protection, it shows how textile waste can be integrated into new value chains.

The textile industry is one of the most resource-intensive sectors and generates significant amounts of waste and emissions. In 2020 alone, approximately 6.95 million tonnes of textile waste were generated in the EU. Worldwide, 92 million tonnes of textile waste end up in landfills in the Global South or in incinerators every year. Mixed polyester-containing waste from fast fashion, workwear or industrial cleaning textiles in the lowest waste category is among the most difficult residual materials to recycle. The EU's Circular Economy Strategy therefore promotes circular processes in the textile sector.

From feasibility study to policy recommendation

In a joint feasibility study, the Fraunhofer Institute for Applied Polymer Research IAP at Potsdam Science Park, Beneficial Design Institute GmbH and matterr GmbH (formerly RITTEC 8.0 Umwelttechnik GmbH) investigated how polyester-containing waste textiles can be converted into the bioplastic polyhydroxybutyrate (PHB).


"With our innovative matterr process, we recover the monomers terephthalic acid (TA) and ethylene glycol (EG) in virgin quality from polyester-containing textile waste – suitable for the production of new polyester," explains Dr. Tim Seedorf, Head of Research & Innovation at matterr GmbH. "We have also shown that the ethylene glycol obtained can be converted into the biopolymer PHB with the help of bacteria," adds Dr. Maren Wandrey, biochemist at Fraunhofer IAP. An analysis by the Beneficial Design Institute further shows that establishing a textile hub in Brandenburg can make a significant contribution to strengthening the regional circular economy through the sustainable use of textile waste and the establishment of new value chains.

The policy paper translates the consortium's findings into concrete recommendations for political decision-makers in Brandenburg.

PHB: Benefits for the economy, society and the environment

PHB is a bioplastic that is completely biodegradable, resorbable and biocompatible. Professor Friederike von Wedel-Parlow from the Beneficial Design Institute emphasises: "PHB combines ecological advantages with economic potential in new markets. Our research has made it clear that designers, scientists and industry can jointly develop solutions that harness these advantages for society and the economy, turning make ecodesign thinking into a success story, also for Brandenburg."


The bioplastic has a wide range of applications, especially where materials remain in the environment permanently – for example, in water, soil or the human body. Examples include geotextiles for erosion control, artificial shoreline reinforcement, tree and branch protectors, or medical products such as suture material.

Action options for a circular textile economy

The policy paper recommends a multi-stage action plan to lay the foundation for a circular textile economy in Brandenburg. It comprises six key recommendations. Clima State Secretary Dr. Haase explains: "The goal is to retain value creation in the region, establish qualified jobs and position Brandenburg as a model region for this EU initiative. The project consortium's policy paper and the preliminary study results contribute to bringing together ecological sustainability and economic strength in Brandenburg."

The results also have supra-regional significance with potential for close cooperation between Brandenburg and partners in Poland and the Netherlands. Through these collaborations, the state can strengthen its position as a pioneer in the circular economy and build European value chains that incorporate design-driven added value.


Policy Paper


Closing the Loop in the Textile Industry: Value Creation in the State of Brandenburg

Policy Paper for Stakeholders committed to a circular bioeconomy in Brandenburg


Prof. Friederike von Wedel-Parlow (BD-I)

Julie C. Stamm (BD-I)

Dr. Jens Balko (Fraunhofer IAP)

Dr. Maren Wandrey (Fraunhofer IAP)


Key recommendations of the policy paper:

Promotion of start-ups and regional textile biorefineries for efficient resource use

Support programmes for research and development of new recycling technologies for old textiles

Establishment of a competence cluster for data-driven textile recycling

Support for digital data collection along the entire value chain

Qualification of companies for the upcoming Ecodesign Directive 2026

Integration of local companies into European value chains as part of the EU initiative "Regional Innovation Valleys for Circular Economy"


POLICY PAPER: 

https://www.iap.fraunhofer.de/content/dam/iap/de/documents/Presse/Policy%20Paper_Value%20Creation%20in%20the%20State%20of%20Brandenburg.pdf

More News from Fraunhofer Institute for Applied Polymer Research (IAP)

#Research & Development

Fraunhofer IAP paves the way for "Green" carbon fibers

A new pilot plant in Guben is set to enable the production of bio-based carbon fibers. The plant is part of the Carbon Lab Factory Lausitz and will make an important contribution to the transformation of the Lausitz region—from a traditionally raw material- and basic industry-oriented region to a hub for innovative high-performance materials. The German federal government and the state of Brandenburg are providing the Fraunhofer Institute for Applied Polymer Research IAP with 53.3 million euros for this purpose.

#Research & Development

Sustainable design of Geosynthetics and roof underlayments made from recyclates

Is it possible to recover plastic recyclates from previously unused waste streams in order to produce high-quality fibers and films? How can bio-based polymer fibers be manufactured so as to allow adjustable biodegradability? These are the questions being addressed by researchers from the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in the Zirk-Tex project.

#Research & Development

Feasibility study shows potential to convert textile waste into PHB bioplastic

Textile waste could serve as a valuable source of raw materials for sustainable plastics in the future, according to the joint TexPHB feasibility study conducted by the Fraunhofer Institute for Applied Polymer Research IAP, Beneficial Design Institute GmbH and matterr GmbH. The study will be presented to the public for the first time at a network meeting on 25 November 2025 at the State Chancellery in Potsdam.

#Research & Development

Better, faster, bio-based: Functional new Plastic alternatives

How can new bio-based and biohybrid materials with improved features be developed faster? Six Fraunhofer institutes are jointly exploring this question in the SUBI²MA flagship project, using an innovative bio-based polyamide developed by Fraunhofer researchers as a model. Its specific properties make it a promising alternative to fossil-based plastics.

More News on Recycling / Circular Economy

#Recycled Fibers

Lindex and BASF partner to bring textile-­to­-textile recycled polyamide to lingerie sector

Lindex has partnered with BASF’s loopamid® to accelerate textile-­to-­textile recycling and advance the shift towards more circular material solutions in the fashion industry. Together they introduce loopamid to the lingerie sector.

#ITM 2026

BB Engineering unveils new, patented “Val-uePack” spin pack at ITM

At the upcoming ITM in Istanbul, taking place June 9–13 at the Tüyap Fair Convention and Congress Center in Hall 7, Booth 702B, BB Engineering will once again be represented at a joint booth with its parent company, Barmag, and its representative, Tekstil Servis. The German machine manufacturer will show-case its expertise in man-made fiber and recycling technology, presenting its entire product portfolio, which includes compo-nents such as extruders and filters, as well as complete sys-tems for spinning synthetic fibers, air-texturing, and PET recy-cling.

#Recycled Fibers

Syre expands partnership with Target to advance next-generation recycled materials at scale

Advancing next-generation materials to support scalable circular solutions across global retail Stockholm, May 2026 — Syre, the textile impact company hyperscaling textile-to-textile recycling today announced an expanded collaboration with Target to accelerate the adoption of next-generation recycled materials across retail at scale.

#Recycling / Circular Economy

Project REWEAR investigates diverse economies of rewear as a global practice of circularity

Every year, European households discard millions of tonnes of clothing. Around a quarter of what gets separately collected is exported, much of it classified as rewearable. A significant share ends up in markets like Kantamanto in Accra, Ghana, where an estimated 15 million garments arrive every week. New research published today reveals what happens when that clothing arrives.

Latest News

#INDEX 2026

INDEX 2026: Reicofil introduces RF 5.10 upgrade boosting output by 10 percent

At INDEX 2026, Reifenhäuser Reicofil will present its latest developments for the nonwovens industry under the guiding themes “Grow Together”, “Expand Together” and “Transform Together”. On this occasion, the leading manufacturer of nonwoven machinery will be unveiling two brand-new technology advancements – RF 5.10 upgrade and RF Core – at the show.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

#ITM 2026

Uster FiberQ excels for recycled raw materials too

Uster FiberQ is a complete solution for raw material utilization, supporting spinners to achieve consistent quality and profitability every day, building further growth for the future. The Turkish company ORTA relies on FiberQ with recycled yarn for its denim production. Data-driven knowledge puts the producer in control of raw material utilization – ready to make the correct decisions for process efficiency, quality and productivity.

#Digital Printing

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

TOP