[pageLogInLogOut]

#Research & Development

Feasibility study shows potential to convert textile waste into PHB bioplastic

The feasibility study shows that textile waste can be converted into high-quality, biodegradable plastics. © Beneficial Design Institute GmbH
Textile waste could serve as a valuable source of raw materials for sustainable plastics in the future, according to the joint TexPHB feasibility study conducted by the Fraunhofer Institute for Applied Polymer Research IAP, Beneficial Design Institute GmbH and matterr GmbH. The study will be presented to the public for the first time at a network meeting on 25 November 2025 at the State Chancellery in Potsdam.


© Beneficial Design Institute GmbH

The feasibility study shows that textile waste can be converted into high-quality, biodegradable plastics.

Since Overshoot Day on July 24, 2025, humanity has used up its resource budget for this year. The textile industry contributes significantly to this: it causes around eight to ten percent of global CO₂ emissions. In the TexPHB feasibility study funded by the Ministry of Economic Affairs, Labour, Energy and Climate Protection (MWAEK), the partners show how this balance can be improved.

Feasible! From PET waste to biopolymer PHB

The approach: textiles that are difficult to recycle, such as mixed polyester-containing waste from fast fashion, workwear or industrial cleaning textiles, which are usually incinerated, are converted into the fully biodegradable bioplastic polyhydroxybutyrate (PHB). Together with textile services and textile waste companies, the Beneficial Design Institute investigated how textile waste previously destined for incineration could be recycled. The process developed by matterr GmbH for the hydrolysis of polyethylene terephthalate (PET), in which the central raw materials of PET – terephthalic acid and ethylene glycol – are recovered in their original quality, was tested for the first time for these critical material fractions. Scientists at Fraunhofer IAP used the ethylene glycol produced as a nutrient medium for wild-type bacteria, which convert it into the biopolymer polyhydroxybutyrate (PHB). At the Biopolymers Processing Centre in Schwarzheide, the PHB obtained was further processed and tested for its material properties. "We have thus demonstrated that PET waste from the textile industry can be converted into a biodegradable polymer using chemical and biotechnological processes, which could replace petroleum-based plastics in the long term," says Dr Maren Wandrey, biochemist at Fraunhofer IAP.

PHB: biodegradable and versatile

As part of the study, Beneficial Design Institute GmbH identified possible fields of application for the biopolymer. "PHB is completely biodegradable and biocompatible. Compared to other bioplastics, PHB also has a good barrier effect against oxygen and moisture. This means it offers great potential for products that are intended to degrade in the environment or in the body – for example, for medical applications, geotextile for erosion protection or agricultural products," explains Prof. Friederike von Wedel-Parlow, Managing Director of Beneficial Design Institute GmbH.

A recently published strategy paper translates the consortium's findings into concrete recommendations for policy makers in Brandenburg. It comprises a multi-stage package of measures designed to lay the foundations for a textile circular economy in Brandenburg.

Networking for regional value creation and textile transformation

Entitled "From Fabric to Bioplastic – From Waste to Value", the TexPHB market study and strategy paper will be presented on 25 November 2025 at a partnering meet-up in the State Chancellery in Potsdam. The event will take place following the 6th Brandenburg Waste Prevention Forum and will bring together stakeholders from business, research, politics and design. The aim is to initiate cooperation and investment that will drive forward the sustainable transformation of the textile and waste management industry in Brandenburg.

Prospects for Brandenburg's bioeconomy

The TexPHB project exemplifies how textile waste can be converted into high-quality, biodegradable plastics – and what opportunities this opens up for a circular economy. The results of the study will serve as a basis for further research and development work. In the long term, the aim is to create a continuous process chain – from textile waste recycling to the production of new biopolymers.

Policy Paper

Closing the Loop in the Textile Industry: Value Creation in the State of Brandenburg

Policy Paper for Stakeholders committed to a circular bioeconomy in Brandenburg


Key recommendations of the policy paper:

Promotion of start-ups and regional textile biorefineries for efficient resource use

Support programmes for research and development of new recycling technologies for old textiles

Establishment of a competence cluster for data-driven textile recycling

Support for digital data collection along the entire value chain

Qualification of companies for the upcoming Ecodesign Directive 2026

Integration of local companies into European value chains as part of the EU initiative "Regional Innovation Valleys for Circular Economy"


Download:

https://tinyurl.com/z6nnmssv


More News from Fraunhofer Institute for Applied Polymer Research (IAP)

#Research & Development

Fraunhofer IAP paves the way for "Green" carbon fibers

A new pilot plant in Guben is set to enable the production of bio-based carbon fibers. The plant is part of the Carbon Lab Factory Lausitz and will make an important contribution to the transformation of the Lausitz region—from a traditionally raw material- and basic industry-oriented region to a hub for innovative high-performance materials. The German federal government and the state of Brandenburg are providing the Fraunhofer Institute for Applied Polymer Research IAP with 53.3 million euros for this purpose.

#Research & Development

Sustainable design of Geosynthetics and roof underlayments made from recyclates

Is it possible to recover plastic recyclates from previously unused waste streams in order to produce high-quality fibers and films? How can bio-based polymer fibers be manufactured so as to allow adjustable biodegradability? These are the questions being addressed by researchers from the Fraunhofer Cluster of Excellence Circular Plastics Economy CCPE in the Zirk-Tex project.

#Recycling / Circular Economy

Closing the Loop in the Textile Industry: Value Creation in the State of Brandenburg

How can the state of Brandenburg benefit from a circular textile industry? This question is addressed in the new policy paper "Closing the loop in the textile industry: Value creation in the state of Brandenburg." Based on the „TexPHB“ feasibility study funded by the Brandenburg Ministry of Climate Protection, it shows how textile waste can be integrated into new value chains.

#Research & Development

Better, faster, bio-based: Functional new Plastic alternatives

How can new bio-based and biohybrid materials with improved features be developed faster? Six Fraunhofer institutes are jointly exploring this question in the SUBI²MA flagship project, using an innovative bio-based polyamide developed by Fraunhofer researchers as a model. Its specific properties make it a promising alternative to fossil-based plastics.

More News on Research & Development

#Research & Development

ITA spin-off TERNAfil wins third place at KUER.NRW 2026 with MAXCarbon technology

The Aachen-based ITA spin-off TERNAfil GmbH has secured third place in the KUER.NRW Business Plan Competition 2026 with MAXCarbon, an innovative carbon-ceramic hybrid fibre developed for applications in the hydrogen economy. The technology combines the mechanical properties of carbon fibres with the thermal and corrosion resistance of ceramic materials.

#Research & Development

DITF develops bio-based binding fibers for wood-fiber insulation materials

As part of the CelluWoodFlex project, the German Institutes of Textile- and Fiber-Research in Denkendorf (DITF) are developing bio-based cellulose ester fibers as alternative binding fibers for flexible wood fiber insulation materials. In addition to the spinning process and the production of suitable staple fibers, the institute is also investigating how wood and cellulose fibers can be separated and recycled at the end of their useful life.

#Research & Development

First "Korea Day" at RWTH Aachen attracts more than 300 participants

The inaugural Korea Day in Aachen brought together representatives from science, business and Korean institutions to strengthen German-Korean cooperation in research, technology and education. The Institut für Textiltechnik (ITA) of RWTH Aachen University was among the participating organisations.

#Research & Development

POLYMERS-5B develops high-performance bio-based polyesters from agricultural waste

The European research project POLYMERS-5B is developing an integrated enzymatic biorefinery to convert agricultural by-products from Mediterranean food production into valuable raw materials for the food, cosmetics and bio-based plastics industries. Using tomato and olive pomace as feedstock, the process aims to recover several product groups from the same biomass stream. The consortium will present its latest technical developments and market findings at Ecomondo 2026 in Rimini on 3 November.

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP