[pageLogInLogOut]

#Recycling / Circular Economy

A circular European value chain turns post-consumer textile waste into new garments for Dutch retailer Zeeman

A closed-loop recycling project has successfully transformed 24 tons of post-consumer textiles into nearly 50,000 garments for Dutch retailer Zeeman, with each product containing a high-rate of 70% recycled content. This achievement represents a major milestone in accelerating textile-to-textile recycling in Europe.

The project was initiated by the Boer Group, with financing support from Refashion, both active partners of ReHubs. The entire value chain was established within Europe. Textiles were collected and sorted in France, before being prepared by mechanical recycling specialist Frankenhuis (part of the Boer Group) in the Netherlands, where colour sorting and defibration took place. Blue and white textiles were selected to naturally influence the colour of the final yarn. The feedstock was then transferred to Italy, where Spinaker spun the yarn and Stella Sky knitted the fabric. Zeeman, as the final customer, played a vital role by defining the type of product to be created and ensuring it aligned with consumer expectations. The project, which ran over eight months, was designed to test both the technical and financial feasibility of producing garments with high levels of recycled content in Europe. The project successfully showcases that post-consumer textiles can be transformed into high-quality yarns and garments, as well that a circular value chain with collaboration across collection, sorting, recycling, spinning, and manufacturing can be achieved within Europe. An accompanying environmental impact report confirmed the benefits of this approach by replacing conventional yarn with the yarn developed in this project, the environmental footprint of the product is significantly reduced, including lower GHG emissions, reduced water use, and decreased energy consumption.

Véronique Allaire, Head of Circularity at Refashion commented: “This project proves that Europe can turn its textile waste into new garments at scale. By building a fully circular value chain here in Europe, we have shown that textile-to-textile recycling is not only possible, but commercially viable. It’s a powerful signal that our industry can lead the shift towards a truly circular economy. “

Mariëlle van Dillen - Senior Buyer Circular at Zeeman commented: “At Zeeman, we want to show that circular innovations can also be accessible for affordable clothing for everyone. By collaborating with strong European partners, we have proven that post-consumer textile waste can be turned into new, high-quality products that our customers love to buy. The sweaters from this project were a great success in our stores, selling very well and demonstrating that customers value affordable circular fashion. This project brings us one step closer to our ambition to reuse textiles more often and reduce our impact as a retailer.”

ReHubs’ recently updated strategy aims to break the supply-demand deadlock in which recyclers struggle to scale without brand commitments, and brands are lacking access to cost-competitive, reliable recycled fibers. This project shows how collaboration across the value chain from collection and sorting to recycling, spinning, and retail can deliver real products to the market.

This project’s success highlights the power of collective action in transforming Europe’s textile waste into valuable new products. By uniting stakeholders with a shared vision, it has proven that closed-loop recycling is both technically possible and commercially viable. With a circular European value chain now demonstrated, this project sets a benchmark for future initiatives and strengthens momentum towards scaling textile-to-textile recycling across Europe.



More News from REHUBS

#Recycling / Circular Economy

Europe needs tipping point to scale textile-to-textile recycling, BCG and ReHubs say

A new report from Boston Consulting Group (BCG) and ReHubs, titled “Advancing Textile Circularity – Europe’s textile waste challenge: Scaling Textile-to-Textile requires enabling mechanisms”, highlights the urgent need for systemic action to tackle Europe’s growing textile waste and scale a circular textile economy.

#Recycling / Circular Economy

REHUBS to unveil strategy and tactical action plan to industrialise textile circularity by 2032

Europe’s circular economy in textiles and apparel is facing a daunting challenge. Increasing volumes of discarded textiles, fragile collection systems, and the flood of ultra-fast fashion are intensifying a crisis of overproduction, waste, and lost value. Despite advances in recycling technology, very few textiles today are recycled back into new textiles, with most waste still downcycled, incinerated, or exported.

#Recycling / Circular Economy

REHUBS to build industry-wide circularity roadmap and action plan in response to increasing textile waste challenges in Europe

ReHubs is leading systemic change across the textile and apparel industry, bringing together key stakeholders to achieve ambitious circularity goals through aligned efforts in infrastructure, policy, and finance. Since its inception, ReHubs has been the catalyst and engine for transforming Europe’s textile and apparel recycling landscape.

#Recycling / Circular Economy

Robert van de Kerkhof is new ReHubs CEO

ReHubs, the European textile recycling alliance, is announcing today a change in its daily leadership: Robert van de Kerkhof is taking over as interim CEO from Chris Deloof, who returns to Ghent University after 2 years of successful engagement with the organisation.

More News on Recycling / Circular Economy

#Recycled Fibers

Lindex and BASF partner to bring textile-­to­-textile recycled polyamide to lingerie sector

Lindex has partnered with BASF’s loopamid® to accelerate textile-­to-­textile recycling and advance the shift towards more circular material solutions in the fashion industry. Together they introduce loopamid to the lingerie sector.

#ITM 2026

BB Engineering unveils new, patented “Val-uePack” spin pack at ITM

At the upcoming ITM in Istanbul, taking place June 9–13 at the Tüyap Fair Convention and Congress Center in Hall 7, Booth 702B, BB Engineering will once again be represented at a joint booth with its parent company, Barmag, and its representative, Tekstil Servis. The German machine manufacturer will show-case its expertise in man-made fiber and recycling technology, presenting its entire product portfolio, which includes compo-nents such as extruders and filters, as well as complete sys-tems for spinning synthetic fibers, air-texturing, and PET recy-cling.

#Recycled Fibers

Syre expands partnership with Target to advance next-generation recycled materials at scale

Advancing next-generation materials to support scalable circular solutions across global retail Stockholm, May 2026 — Syre, the textile impact company hyperscaling textile-to-textile recycling today announced an expanded collaboration with Target to accelerate the adoption of next-generation recycled materials across retail at scale.

#Recycling / Circular Economy

Project REWEAR investigates diverse economies of rewear as a global practice of circularity

Every year, European households discard millions of tonnes of clothing. Around a quarter of what gets separately collected is exported, much of it classified as rewearable. A significant share ends up in markets like Kantamanto in Accra, Ghana, where an estimated 15 million garments arrive every week. New research published today reveals what happens when that clothing arrives.

Latest News

#INDEX 2026

INDEX 2026: Reicofil introduces RF 5.10 upgrade boosting output by 10 percent

At INDEX 2026, Reifenhäuser Reicofil will present its latest developments for the nonwovens industry under the guiding themes “Grow Together”, “Expand Together” and “Transform Together”. On this occasion, the leading manufacturer of nonwoven machinery will be unveiling two brand-new technology advancements – RF 5.10 upgrade and RF Core – at the show.

#Dyeing, Drying, Finishing

Tradition and Innovation – Phoenox Textiles Ltd. relies on state-of-the-art carpet back-coating line from Brückner

For more than 70 years, Phoenox Textiles Ltd. has been synonymous with quality, reliability, and inno-vation in the textile industry. Founded in 1954 in Huddersfield (Yorkshire, UK), a region with a long tradition in textiles, this family-owned business has continued to evolve without losing sight of its roots. Today, in its fourth generation under the leadership of the Mosley family, Phoenox successfully combines decades of experience with a clear, forward-looking corporate strategy.

#ITM 2026

Uster FiberQ excels for recycled raw materials too

Uster FiberQ is a complete solution for raw material utilization, supporting spinners to achieve consistent quality and profitability every day, building further growth for the future. The Turkish company ORTA relies on FiberQ with recycled yarn for its denim production. Data-driven knowledge puts the producer in control of raw material utilization – ready to make the correct decisions for process efficiency, quality and productivity.

#Digital Printing

EFI brings high-performance display graphics, packaging, and textile printing innovations to FESPA 2026

Electronics For Imaging, Inc. (EFI™) is bringing a broad range of new hybrid, roll-to-roll, and textile inkjet innovations to FESPA Global Print Expo 2026, taking place 19-22 May at Fira Barcelona Gran Via. Visitors to the EFI stand (Hall 3, #C85) will see the new EFI VUTEk M3h X hybrid LED printer, new EFI VUTEk® FabriVU® 340 i8 eight-colour dye sublimation printer, the EFI VUTEk X5r roll-to-roll LED printer, and the EFI VUTEk Q3h XP seven-colour hybrid printer in action, each designed to help sign and display producers scale output, diversify applications, and drive more profitable growth.

TOP