[pageLogInLogOut]
USTER Think Quality

#Yarn & Fiber

Teijin Aramid: Taiichi Machida to succeed Peter ter Horst as CEO

Peter ter Horst will step down as Chief Executive Officer at the end of 2025, after 19 years of dedicated service. Effective October 1, 2025, Taiichi Machida will take over as CEO.
Left Taiichi Machida and right Peter ter Horst ©Teijin Aramid
Left Taiichi Machida and right Peter ter Horst ©Teijin Aramid


Peter ter Horst has played a pivotal role in guiding Teijin Aramid through both prosperous and challenging times. Over the past 5.5 years as CEO, he led the company through the COVID-19 pandemic, a major fire at the Delfzijl site, and the current organizational transformation aimed at strengthening the company’s future resilience. His leadership has been marked by a deep commitment to the company’s people, values, and long-term vision. Peter will remain with Teijin Aramid until December to support a smooth transition.

“It has been an incredible journey. I’m proud of what we’ve achieved together, especially in the face of adversity. Teijin Aramid is entering a new phase, and I’m confident that Taiichi Machida will bring the right energy and strategic insight to lead the company forward”, says Peter ter Horst. 

Taiichi Machida brings extensive strategic experience to his new role. He has held various positions within Teijin Ltd., including in the Healthcare Business Unit—one of the company’s major divisions. For the past three years, Machida has served as General Manager of the Corporate Strategy Department at Teijin Ltd., where he has been instrumental in shaping the group’s strategic direction.

Taiichi Machida says: “I am honored to take on this role at Teijin Aramid. Peter has built a strong foundation, and I look forward to working with the team to continue evolving the business and delivering value to our customers and stakeholders.” 

With his broad expertise in corporate strategy and cross-functional leadership, Machida is well-equipped to lead Teijin Aramid through its next phase. The company is confident that his insights and experience will be a valuable asset in navigating the evolving industry landscape. Teijin Aramid expresses its deep gratitude to Peter ter Horst for his outstanding leadership and warmly welcomes Taiichi Machida to his new role.



More News from Teijin Aramid

#Yarn & Fiber

Teijin announces availability of DPP-compliant products aligned with Europe’s ESPR Environmental Regulation

Teijin Limited announced today that it has started rolling out initiatives to enable aramid fibers and carbon fibers to be accompanied by Digital Product Passport (DPP) technology, which enhances supply chain transparency by verifying the origins of materials and supporting sustainability claims. The company is using the supply chain traceability system from Netherlands-based Circularise B.V., in which Teijin has invested since November 2024, to develop DPPs for each product.

#Composites

Teijin Carbon showcases new eco-friendly Tenax Next™ R2S 513 6mm short carbon fiber at JEC World 2025

Teijin Carbon, a leading manufacturer of carbon fiber products, is presenting its latest development in sustainable materials at JEC World 2025 (hall 6, G22). New Tenax Next™ R2S 513 6mm is a short carbon fiber product in rice-shaped form for reinforcing thermoplastic compounds that not only offers exceptional performance characteristics but also reinforces the company’s commitment to environmental responsibility and circularity.

#Recycling / Circular Economy

Teijin to invest in Circularise B.V. and adopt its supply chain traceability platform to promote the Circular Economy

Teijin Limited announced today that it will invest in Circularise B.V., a company based in The Hague, Netherlands, which develops product traceability management systems using blockchain technology. Teijin will also implement Circularise’s software to improve visibility into its global supply chain. Circularise’s proprietary “Smart Questioning”(*) solution, which utilizes Zero-Knowledge Proof (ZKP) technology, provides both anonymity and transparency to ensure a highly reliable product traceability system.

#Yarn & Fiber

Low-dielectric quartz fiber prepreg from Teijin Group’s Renegade Materials Corp. is first to achieve NCAMP certification

Teijin Limited announced today that an epoxy thermoset prepreg on quartz fabric from its carbon fiber subsidiary, Renegade Materials Corporation, is the first such material to qualify for certification by the U.S. National Center for Advanced Materials Performance (NCAMP). The high-performance, low- dielectric prepreg, made by impregnating woven quartz fabric with epoxy resin, is used for aircraft radar domes (radomes.) .

More News on Yarn & Fiber

#Man-Made Fibers

Lenzing improves profitability as strategic transformation gains momentum

The Lenzing Group reported improved operating profitability in the first nine months of 2026 despite declining revenue and a challenging market environment. Revenue decreased by 2.3 percent to EUR 1.93 billion, while adjusted EBITDA remained stable at EUR 353 million. The adjusted EBITDA margin increased from 17.9 percent to 18.3 percent, reflecting progress in the company's strategic transformation under its “Grow Nonwovens. Reset Textiles.” strategy.

#Recycled Fibers

C&A and Zalando join Altag® Fiber Club to accelerate adoption of agricultural waste-based fibres

Fashion for Good and AltMat announced today that C&A and Zalando have joined the Altag® Fiber Club as its first brand signatories, marking a critical commercial milestone in the journey to mainstream adoption of next-generation fibres derived from agricultural waste.

#Man-Made Fibers

Kraig Biocraft Laboratories launches performance yarn development program based on spider silk

Kraig Biocraft Laboratories has launched a development program for high-performance yarns based on its recombinant spider silk technology. The initiative follows the company's first commercial shipment of a custom spider silk yarn to a performance apparel customer and includes the delivery of spider silk samples to a textile technology company with experience in aerospace-related material development.

#Man-Made Fibers

Lenzing and Kaihara to debut REMOD denim collection at Kingpins Amsterdam

The Lenzing Group, a global producer of wood-based fibers for the textile and nonwovens industries, has partnered with Japanese denim manufacturer Kaihara Corporation to launch the “REMOD Collection”. The collection combines three of Lenzing's fiber offerings for denim applications: TENCEL™ Lyocell Standard, TENCEL™ Lyocell – HV100 and TENCEL™ Lyocell dtex 2.2.

Latest News

#Textile processing

YKK Bangladesh celebrates 25 years of fastening production and business development

YKK Bangladesh Pte. Ltd., a subsidiary of Japanese fastening manufacturer YKK Corporation, has celebrated its 25th anniversary with a commemorative ceremony in Dhaka on November 8, 2026. Since its establishment in November 2000, the company has expanded its manufacturing capacity and business operations alongside the growth of Bangladesh's apparel industry.

#ITMA Asia + CITME 2026

Murata Machinery to showcase AIcone winding and high-speed VORTEX spinning at ITMA ASIA 2026

Japanese textile machinery manufacturer Murata Machinery will present its PROCESS CONER AIcone automatic winder and VORTEX 870 EX spinning machine at ITMA ASIA + CITME 2026. Under the theme “Right Choice, Bright Future”, the company will highlight technologies for efficient yarn manufacturing, combining energy-saving winding solutions with high-speed air-jet spinning. Visitors can meet Murata Machinery in Hall 5, Booths E01 and E02.

#ITMA Asia + CITME 2026

DORNIER highlights airbag, filtration and composite weaving technologies at ITMA ASIA 2026

Lindauer DORNIER will present its latest developments in air-jet and rapier weaving technology for technical textiles at ITMA ASIA + CITME 2026. The German machinery manufacturer will focus on the reliable and efficient production of airbag fabrics, high-density filters and reinforcement textiles for fibre-reinforced composites. Alongside its A2 air-jet and P2 rapier weaving machines, DORNIER will highlight its TRITOS FLEX technology for complex 3D composite preforms, retrofit solutions and expanded service capabilities in Asia. The company will exhibit in Hall 3, Stand E02.

#Retail & Brands

Marks & Spencer expands across Asia Pacific through partnership with Global Fashion Group

Marks & Spencer (M&S) and Global Fashion Group (GFG) have announced a strategic partnership to expand the British retailer's fashion business across Asia Pacific. M&S has launched on Southeast Asian fashion platform ZALORA and plans to enter THE ICONIC in Australia and New Zealand in early 2027. The agreement also introduces regional fulfilment for Australian M&S.com orders, enabling faster deliveries and returns while supporting a capital-light international growth strategy.

TOP